Skip to content
AquaRisk

How AquaRisk estimates lead pipe risk

The score combines two public signals: how old the building, or its neighborhood, is likely to be, and what’s been found in the local utility’s water. Here’s every rule, every source and every gap.

How lead reaches the tap

  1. StreetUtility’s sideOwner’s sideKitchen tapWater mainService lineCurb stopMeter and shutoff

    01

    The aging pipe

    A connects the water main under the street to your home. Through the first half of the 1900s, many cities laid them in lead because it was durable and easy to bend. Congress banned new lead pipe in 1986, but lines already in the ground stayed.

  2. StreetUtility’s sideOwner’s sideKitchen tapWater mainService lineCurb stopMeter and shutoffLead pipe wallMineral scaleWater

    02

    The protective scale

    Over decades, minerals in the water build a thin crust of inside the pipe, between the lead and the water. Utilities add to keep it stable. It’s a barrier, not a replacement.

  3. StreetUtility’s sideOwner’s sideKitchen tapWater mainService lineCurb stopMeter and shutoffLead pipe wallMineral scaleLead particles

    03

    When lead gets in

    Lead dissolves or flakes off when the scale is disturbed: a change in water chemistry, digging nearby, or water sitting still in the pipe for hours. That’s why the first water after a night away can carry the most.

  4. StreetUtility’s sideOwner’s sideKitchen tapWater mainService lineCurb stopMeter and shutoff123

    04

    What you can do

    Find out what the pipe is made of where it enters the house. Filter what you drink and cook with using a filter certified for lead, and use cold water. If it’s lead, ask your utility what its replacement program covers.

What the score estimates

A service line is the pipe that carries water from the main under the street into a building. AquaRisk estimates how likely it is that the service line at an address is made of lead, and adds a smaller amount for the overall quality of the utility’s water.

It’s an estimate built from records, not a measurement. It can’t see the pipe, and it doesn’t test water. Only the utility’s service line inventory or an inspection can confirm a pipe’s material.

How it’s calculated

The score is the pipe-age part plus the water-quality part, kept between 0 and 100.

Pipe age uses the best evidence available for the address, in this order: the year the building was built; if there’s no year, whether it’s inside a Richmond historic district; if neither, whether its ZIP code is one where more than 40% of homes were built before 1940. These never add together.

Pipe age: year built
Before 194050
1940–196040
1961–197830
1979–198620
After 19865
Pipe age: when there’s no year built
No year built, but inside a Richmond historic district30
No year built or district; ZIP code flagged for older housing30
No year built or district; ZIP code not flagged10
No signal at all (Richmond outside historic districts)0

Water quality counts the contaminants in the utility’s water that are above the health guidelines of the Environmental Working Group (EWG), a nonprofit. Those guidelines are stricter than federal legal limits. When AquaRisk has no data for a utility, this part takes a neutral value rather than zero, because missing data isn’t evidence of clean water.

Water quality: contaminants above EWG guidelines
None above guideline5
1–2 above guideline8
3–5 above guideline12
6–8 above guideline16
9 or more above guideline20
No data for the utility5

Risk bands

  • Low0–34
  • Moderate35–64
  • Elevated65–100

With today’s inputs the highest possible score is 70: a home built before 1940, served by a utility with nine or more contaminants above guideline. The scale runs to 100 so it can absorb new signals later.

Data sources

Records that change are queried when you search, and results may be cached for up to 24 hours. Static files are checked by hand.

  1. 1
    Esri World Geocoder(opens in a new tab)

    Finds any Virginia address and its ZIP code, city and county.

    Queried at search time

  2. 2
    City of Richmond GIS(opens in a new tab)

    Address points, parcels and historic district boundaries.

    Queried at search time

  3. 3
    Henrico County GIS(opens in a new tab)

    Address points and year built from assessment (CAMA) records.

    Queried at search time

  4. 4
    City of Norfolk real estate assessment(opens in a new tab)

    Year built for Norfolk properties.

    Queried at search time

  5. 5
    U.S. Census American Community Survey(opens in a new tab)

    The list of ZIP codes where more than 40% of homes were built before 1940.

    List last checked July 20, 2026

  6. 6
    EWG Tap Water Database: City of Richmond(opens in a new tab)

    Contaminant results, tests from 2021–2023 (most contaminants), 2014–2024 (overall range).

    Recorded June 21, 2026

  7. 7
    EWG Tap Water Database: Henrico County(opens in a new tab)

    Contaminant results, tests from 2021–2023.

    Recorded January 1, 2024

  8. 8
    Virginia Department of Health(opens in a new tab)

    Boil-water advisories, checked for the banner on the home page.

    Checked hourly

  9. 9
    AquaRisk utility registry

    64 utilities: their ZIP codes, localities and program links.

    Last checked July 20, 2026

Coverage

AquaRisk covers 64 Virginia water utilities. What it knows about pipe age varies:

  • Year built for each property: Henrico County Department of Public Utilities and City of Norfolk Department of Utilities.
  • Historic districts: City of Richmond Department of Public Utilities.
  • ZIP-code estimate only: the other 61 utilities.

Contaminant data is in AquaRisk for Richmond and Henrico. For every other utility the water-quality part uses the neutral value, and results link to the utility’s EWG report. See the coverage map for each county and city.

Limitations

  • Richmond outside historic districts. Richmond doesn’t publish construction dates through a service AquaRisk can query, so an address outside a historic district gets zero pipe-age points. Many old neighborhoods, including Highland Park, Barton Heights, Oregon Hill and Swansboro, are outside those districts.
  • ZIP-code estimates are coarse. A ZIP code covers thousands of homes of different ages. The estimate says nothing about a specific house.
  • Building age isn’t pipe material. Old homes may have had their lines replaced; newer homes can connect to an older line on the utility’s side.
  • Water-quality data is static. EWG figures are entered by hand and reflect the testing periods shown above, not current conditions.
  • Area comparisons are standing estimates. The “typical” ZIP and city values shown with a result are fixed estimates for the area, not averages of searches.
  • Lead isn’t tested here. EWG’s utility-level data generally doesn’t capture lead from service lines, which varies house by house.

Who built it

AquaRisk was built by Avyay Bharadwaj as an independent civic project. It isn’t produced by or affiliated with the Commonwealth of Virginia or any city, county or utility it mentions.

Found something wrong? Report an error. Reports are saved for the maintainer to review.